axenz
Posts : 82 Join date : 2007-12-15 Location : Mentiri
| Subject: I'm selling my used HS-635HB High Torque servo Wed Jan 02, 2008 5:57 pm | |
| Hi all, I'm selling as above mention. Here are the spec Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C Operating Speed (4.8V): 0.18sec/60° at no load Operating Speed (6.0V): 0.15sec/60° at no load Stall Torque (4.8V): 69 oz/in. (5.5kg.cm) Stall Torque (6.0V): 83 oz/in. (6kg.cm) Operating Angle: 45 Deg. one side pulse traveling 400usec 360 Modifiable: Yes Direction: Clockwise/Pulse Traveling 1500 to 1900usec Current Drain (4.8V): 5.3mA/idle and 400mA no load operating Current Drain (6.0V): 6.6mA/idle and 500mA no load operating Dead Band Width: 4usec Motor Type: 3-Pole Ferrite Potentiometer Drive: Indirect Drive Bearing Type: Dual Ball Bearing Gear Type: Karbonite Gears Connector Wire Length: 11.81" (300mm) Dimensions: 1.6" x 0.8"x 1.5" (40 x 20 x 39mm) Weight: 1.83oz. (52.1g)
Selling 1 pc for B$40 3 pc for B$100 Let me know if interested | |
|