Posts : 90
Join date : 2008-07-21
Age : 37
Location : Brunei
|Subject: gyro from futaba for airplane Fri Oct 31, 2008 3:28 pm|| |
•This gyro can detect rotations around the X-axis and Y-axis independantly,
and can control aileron and elevator, or elevator and rudder at the same time.
•Employing the AVCS system, this gyro always maintains the airplane’s attitude even when flying upright, inverted, upward, downward or knife-edge against sudden changes in weather conditions like wind. The gyro makes flying easier by doing most of the correction control for you. The gyro automatically removes the bad tendencies of your airplane at the same time.
•The gyro has a built-in mixing circuit for elevons and ruddervators.
•Thanks to the extremely low drift of the newly developed, high-precision
gyro-sensor, based on SMM (Silicon Micro Machine) technology, trim
deviation rarely happens during flight.
•The sensitivity of the gyro can be remotely adjusted from the transmitter. In addition, the AVCS/Normal modes and gyro On/Off can be remotely changed from the transmitter.
•Using high-density surface mounting technology we realized the small size and light weight.
•The conductive resin case improves the resistance to EMI (Electromagnetic interference).